WEATHERPARSE FOR HOME ASSISTANT
===============================
Home Assistant integration for WeatherParse (https://github.com/mobilevoid/weatherparse), the AcuRite Access
weather station server. It also works with Acuparse 3.x servers.
It reads the station's dashboard data (/api/v1/json/dashboard/) on your network once a minute and creates sensors:
temperature, feels like, dew point, today's high and low, humidity, wind speed, gust and direction, pressure,
rain and rain today, last reading time, and for an Atlas: UV index, light and lightning (strikes today, distance,
last strike). Sensors are only created for readings your station provides. Units follow your Home Assistant settings.
Nothing is sent anywhere except requests to your own WeatherParse server.
Install with HACS
-----------------
Needs Home Assistant 2025.1 or newer.
1. HACS > three dots > Custom repositories.
2. Repository: https://github.com/mobilevoid/weatherparse-homeassistant Category: Integration.
3. Install WeatherParse and restart Home Assistant.
Manual install
--------------
Copy custom_components/weatherparse into your Home Assistant config/custom_components folder and restart.
Set up
------
Settings > Devices & services > Add integration > WeatherParse. Enter the address of your WeatherParse server,
for example http://192.0.2.10. Turn on "Verify the HTTPS certificate" only if the server has a real certificate.
The polling interval (default 60 seconds, minimum 30) is under the integration's Configure button.
License
-------
Apache License 2.0 (Apache-2.0), the same license as Home Assistant. See LICENSE.
WeatherParse itself, the server, is AGPL-3.0.
The icon in custom_components/weatherparse/brand is the WeatherParse mark (a sun over two wind streams), made for
WeatherParse by its authors and included here under Apache-2.0. Home Assistant 2026.3 and newer show it on the
integration's page; older versions show a placeholder.