Stickwalker ports my matching Pokéwalker firmware reconstruction to the M5Stack Stick S3.
For the full write-up and user guide, visit my website.
You need a Stick S3, a BPV10NF photodiode and a USB-C data cable. Connect the photodiode's anode to GND and cathode to G5.
Download the firmware ZIP from Releases and follow the installation guide.
Downloads use placeholder built-in artwork. For the original graphics, build with artwork from your own ROM.
L is Left, M is Center and R is Right. The default orientation is left-side-down.
Hold M for about half a second to wake the screen. Hold L+R for one second to open Stick Settings. See controls for the other layouts.
Build instructions · Contributing · Issues
By lumirth, under MIT. Credits and third-party licenses.